Wavlink Halo Lay X3 Whole Home WiFi Mesh System Setup
Wavlink Halo Lay X3 is a whole home tri band wifi mesh system. Very easy to install & configure as well. Anyone can set up the device without any technical expertise. Our setup guide will be sufficient for you to have knowledge. For that you need to read the further section very carefully till the last. Along with the Wavlink Halo Lay X3 Setup guide on this page you’ll also get installation information and specification of the device. Furthermore, we have added the troubleshooting guide to resolve the common troubles with the network.
Wavlink Halo Lay X3 Device Specification
Halo lay X3 is a tri band networking device. It offers up to 3000 Mbps total bandwidth speed. You can connect up to 10 devices with the main Halo Lay X3 to extend the network. To create instant connection with the network the device has an ultra sensitive touch like feature. With this feature visitors can connect with your home network. You don’t need to share your network’s password with them to connect. In addition the device has Ethernet port with 10 times faster speed then standard helping you in establishing wired connection for smooth gaming and streaming. With the built in high power amplifier of Wavlink Halo Lay X3 setup you can enjoy extremely wide WiFi coverage. Multiple users can connect with the device simultaneously without any lag or reduced speed.
Wavlink Halo Lay X3 Mesh Installation
Installation process of the wavlink halo lay X3 is quick and simple. To install the device in your existing home network you need to connect the main device with your home modem. For this connection you can use ethernet cable. Insert the ethernet cable in the Ethernet port of your modem device. Thereafter insert the other end of the same cable in the halo lay X3 device to be set up in router mode.
Once done you need to turn the power on and for that use the power adapter of the device. Connect it with the device and power outlet to supply power. Once it is turned on, move towards the Wavlink Halo Lay X3 setup for the main device and thereafter you need to connect the other device in the network. Configuration of the other devices is to be done after the configuration of the main device to be set as the router.
Process To Setup Wavlink Halo Lay X3
Wavlink Halo Lay X3 setup is to be done by following simple configuration steps as mentioned underneath. Check out these steps to configure your device and enhance your networking experience.
- To begin the set up you need or laptop or computer device in which you can browse the wifi.wavlink.com portal
- First connect the device with the wavlink halo‘s network. To establish connection you can choose between wire or wireless method.
- If you choose wired method then use ethernet cable to connect the devices
- In case you opt for the wireless method then go to the WiFi settings in your computer/ laptop. Next you need to search for the wavlink default SSID.
- Once connected you can proceed with the setup by opening a web browser
- Browse the wifi.wavlink.com and access the dashboard by entering the default details.
- Use admin as password to assess the settings and then follow the on screen instructions.
- Once configuration is complete for the main device add the extended devices to the network.
- Turn on the power of the extended devices and let them connect with the main device.
- Follow the on screen guide to complete the configuration of your network and then press finish in the end.
Wavlink Halo Lay X3 Setup: Troubleshooting Guide
Troubleshooting the Wavlink Halo Lay X3 Setup issues is very simple. With our troubleshooting guide you can resolve the common errors including slow network speed, device connected but no internet, can’t access wifi.wavlink.com etc.
Verify Internet Connectivity
First of all you need to verify that the internet from your host device is working perfectly or not. In case the issue is with the host device network then connect to ISP for solution.
Check For Damaged/Loose Wire Connected
Check for the damaged or loose wire connection with your Wavlink Halo Lay device. In case any issue is found, make the required changes including replacement of damaged cable or power adapter.
Is The Firmware Updated?
Check for the firmware update. In case your firmware is not the latest one, you might face trouble. Firmware updates will fix the bugs and you can enjoy the services smoothly.
Try Restarting The Device
Restarting the device resolves the temporary issues. You can move ahead with the restarting of the device. To perform a restart you need to cut out the power supply. Take out the power adaptor plug from the power outlet. Wait and then plug the adapter back. Let the device reboot and then verify the problem solved or not.