WL WN573HX1 AX1800 Outdoor AP Setup: A Detailed Information
Desire to extend your home network outside in the garden or lawn area? Searching for a device but yet didn’t get the perfect one? Check out this article about WL WN573HX1 AX1800 outdoor AP Setup, a perfect device to extend the network outside. It is a dual band device with four 8dBi Omni detector detachable antennas. The device has the capability to extend your network and provide your stable connection even outside areas. In this device advanced MU-MIMO & OFDMA technology is used to simultaneously communicate with multiple devices.
You can easily set up the device with wavrouter app or web UI. Also you can manage and monitor the data using by using the app as well as web interface. The device can easily be installed on a wall or a pole. You can check out our detailed guide which contains step by step instructions to assemble, install and set up the device.
WL WN573HX1 Assemble
You can easily assemble the device. To proceed the assembling process you have to unpack the device and take out the converter with cable and antennas. Also take out the cover of the device that protects it from water. Start assembling it by following the further steps:
- First of all you need to take out the converter cover and pass the RJ45 cable through it.
- Thereafter you have to screw the waterproof seal into the waterproof connector bracket.
- Next you need to pass the RJ45 cable through the bracket and screw the waterproof connector bracket into the cover.
- Once done you can put the waterproof sealing ring on the connector bracket.
- Now connect the RJ45 cable to the WAN/ LAN port and then screw the connecting cable into the 2.4 g and 5G antenna connectors
- Lastly screw up the connector and the device assembled successfully.
WL WN573HX1 Outdoor AP installation
Installation of the device may take a few minutes. Afterwards you can proceed with WL WN573HX1 AX1800 outdoor AP setup. To complete the installation you need to follow the step by step guide as given:
- First of all decide where you desired to locate the device and then Mount it there
- After mounting the device you need to connect the device with the PoE
- To connect with PoE you need an Ethernet cable. Now insert the internet cable one end in the device and other end in the PoE
- Once the device is connected successfully you can proceed with the setup.
WL WN573HX1 AX1800 Outdoor AP Setup procedure
Set up of the device is not at all a daunting task. You can easily configure your device by using the mobile app. Also you can configure it using the web interface. Opt any of the methods as per your preference. Step by step guide for both ways to configure the device is described further.
Web Based Setup
- Web based WL WN573HX1 AX1800 Outdoor AP Setup needs the laptop device to proceed.
- Connect the laptop device with the WN573HX1 device network. You can use ethernet cable or rush to the device Wi-Fi settings and search for the SSID of the product.
- Once connected you need to launch the web browser that has been installed in your device already.
- You can choose any of the browsers including Internet explorer to proceed the setup.
- In the browser’s address bar you have to enter IP address 192.168.10.1 or waplogin.link
- Click enter and default login page will appear on the screen
- Now you need to enter a password in the given space as admin (all in lowercase) and you can access the settings by clicking on the login option.
- Once you get the access you need to proceed to the screen guide to complete the configuration.
- First choose the country and then the time zone. Create a password for your admin login.
- Choose the next option and then select the mode. You need to choose it as AP mode and then press next.
- As you click next you have to create a password for your network security.
- Follow the screen and save the settings you have done.
App Based Setup
App based setup of the device is similar to the web based setup. It’s just to configure using the app you need a mobile phone instead of laptop. Install the wavrouter app on your smartphone from Google Play Store or app store. Once installation completes you can proceed with the setup by following the given process:
- Configure your device by connecting it to the smartphone.
- To established this connection between the two you need to use Wi-Fi settings
- Once connected to the network of the WN573HX1 device, you have to launch the app.
- Follow the screen guide of the app and get access to the settings of the device.
- You can use admin as your default password and then click on login option
- Create a security password for your admin login and then create a password for your network after choosing AP mode.