A Comprehensive Guide On WN570HA1 AC600 Outdoor AP Setup
Facing issues with the WN570HA1 AC600 Outdoor AP Setup? If yes, then do not worry as we are here with a complete guide on the same. The guide covers each aspect from the key specifications to the setup process. To know these details you need to read it till the end.
Key Specifications
Firstly let’s cover up the complete specifications of WN570HA1 AC600 Outdoor AP Setup :
- It complies with IEEE 802.11 a/b/g/n ac standards.
- Next, it supports dual frequency bands. The 2.4Ghz band provides speeds of upto 150 Mbps whereas on the 5Ghz band you get speeds of 433 Mbps.
- Further, you get passive PoE (Power Over Ethernet) support for flexible deployment of the device. It simply means that it can also be installed in areas where power outlets are not readily available.
- Additionally, its weatherproof case can withstand any harsh weather conditions with ease.
- Moreover, it provides three different setup modes. So WN570HA1 AC600 Outdoor AP Setup can be used in repeater mode, access point mode and as a router.
- Next, it provides maximum security with the WAP and WPA 2 security encryption.
- It also contains a built in 15kV ESD lightning arrester.
- Lastly, with the high gain dual polarized antennas you get wider coverage.
Hardware Overview
Next, let’s see what all you get inside the purchased pack. As you unbox you should get the following items:
- One wifi AP/ Range Extender/ Router.
- Two Detachable Omni Antennas
- One RJ45 Networking Cable
- One power adapter
- One PoE converter
- One Main Body Holder
- Two Cable Ties
- One Screw Fittings
- Lastly, a user manual containing all the little details.
Connecting Hardware
The first step towards the WN570HA1 AC600 Outdoor AP Setup is connecting the hardware.
- First we need to connect the RJ45 cable to the RJ45 port of the wifi device. For this you need to pass it through the spiral cover then through the rubber seal and lastly through the holder.
- Next spin the 2.4G and 5G antenna into the 2.4G and 5G External RP-SMA connector respectively.
- Lastly, screw up the holder and the spiral cover.
WN570HA1 AC600 Outdoor AP Setup Guide
Now let’s jump on to the step-by-step instructions for the WN570HA1 AC600 Outdoor AP Setup:
Power On
- First install your device and connect the Ethernet cable to the “PoE port” of the PoE converter.
- Secondly, take another Ethernet cable and connect its one end into the “LAN DATA IN” port of the PoE converter. Connect the other end to the LAN port of your router.
- Now, plug in the provided power connector into the DC24V port of the PoE converter. Plug in the power adapter into a properly working power outlet and switch it on.
- Lastly, push the power On/Off button on the PoE converter to power on the device.
Connect
This is the second step for WN570HA1 AC600 Outdoor AP Setup. So to connect your device, first unplug the ethernet cable from your device if any is attached. Next go to the wifi settings and in the list of available networks look for the network name WAVLINK-N or WAVLINK-AC. Select the network and click on “Connect”.
Configuration
- Further, on the connected device open any internet browser like Chrome, Safari, Firefox or any other of your preference. Just make sure that the internet browser that you choose is not corrupted or outdated.
- Next, go to the address bar and enter the default IP address or web address and press Enter. The default IP address is http://192.168.10.1 whereas the default web address is http://wifi.wavlink.com.
- As you press Enter, the login page pops up. In the blank column enter “admin” and tap on Login.
- On the next page, look for the “WIZARD” option on the bottom of your device’s screen. Tap on it.
- Next, click on AP (LAN Bridge) and then select the security type and enter the password for your network.
- Lastly, follow the on-screen directions for completing your WN570HA1 AC600 Outdoor AP Setup.
Resetting The WN570HA1 AC600 Outdoor AP
In case you had already tried setting up the device but weren’t able to complete the process successfully and now you want to redo the setup then for a fresh start you can reset the device. To reset first locate the reset button on the AP device. Secondly press and hold the reset button for about 8 to 10 seconds or until the LED lights switch off completely. Lastly, release the reset button and redo the setup process all over again.
Facing Issues? Connect To Us!
For assistance and guidance with the setup or for resolving any queries and issues, feel free to connect to us.