Confused about using the wonlink extender device? Initiating wonlink extender configuration seems to be daunting for you? Don’t worry, just read the content of this article to get the answer to your every question related to wonlink link extender device configuration. Extended devices are included by people in their networking to enhance their router network signal coverage and eliminate dead zones. Wonlink’s user-friendly web interface allows you to proceed with configuration of the device to add it into your existing network very easily. You can easily connect the device to boost up signals if you are aware of the setup process. To make it easy for you we break the setup process into simple and understandable steps. Read this article till the last together necessary knowledge. 

Wonlink Extender configuration Process

You can opt for any of the one method to add the device in your home networking. Wonlink extender can be configured using a Web based setup method. Both the methods are very simple to initiate. Web based method is time consuming but allows you additional configuration to enhance the security of the network. So, let’s check out the steps in both the methods of wonlink extender setup, we break the process into easy to understand and followable steps. 

Web Based Setup

Web based wonlink extender configuration is not a formidable task, it’s a little time consuming. But with this method of setup you can enhance your network security and boost its performance as well. To initiate the wonlink wifi extender setup, follow the steps as breaked below:

• You can initiate the setup with placing and powering the device. Placement of the device must be adequate to allow the device to receive signals properly and extend them to entire space where signals are weak. Once placement is decided you need an electric power outlet to turn on your wonlink extender device. 
• Move ahead in the setup when your wonlink extender device LED stables. 
• It’s time to make a connection between computer or smartphone and the wonlink extender network. 
• Connections can be made using wired or wireless methods. 
• When the device is connected to the network of your extender service, move ahead in the process by launching a web browser such as internet explorer or google chrome or any other. 
• Specify the device IP “192.168.10.1” in the URL bar. 
• Next you have to login by using the default login details as the login page displays on the screen. 
• Move further in the wonlink extender configuration process and provide the host router device information to connect the devices. 
• Thereafter create a new SSID & password to secure your home network. 
• Furthermore, check for the firmware update to boost up the device performance 
• Opt for the apply option to finalize the setup. 
• Relocate the device to optimize the network and test your new network. 
• For new network testing you can use a wifi enabled laptop or smartphone device. Connect it to the extender network and use it (browse websites, watch high definition videos online etc) to test the network speed.