WL WN575A2 AC750 Extender Setup

Live Chat

Struggling with a technical issue? Write to us right away. Our support team often responds quickly.

OR

Don’t want to wait? Call us right away.

Call Now

    Quick and Easy WL WN575A2 AC750 Extender Setup Guide

    Often Wavlink extender devices come with repeater, router and AP mode features. This is one of the reasons why people prefer them more. You can do WL WN575A2 AC750 Extender Setup in your preferable mode very easily. The setup of the device will enhance your home network range and offer high speed internet surfing across your home. You don’t need technical expertise to do the setup. With our guidance you can pursue it by yourself. You can connect with our Wavlink technical support team for guidance. Our team will guide you with the process even on call. Although you can also check the next segment.

    In the next segment of this page we are going to specify quick and easy to follow WL WN575A2 AC750 Extender Setup instructions. You can check them out and also get other relevant information about the WN575A2 Extender device.

    WL WN575A2 AC750 Extender Setup

    WL WN575A2 AC750 Extender Specification

    • The extender device support IEEE 802.11a/b/g/n/ac standards
    • Enhance your wireless coverage and offer 5GHz 433Mbps and 2.4GHz 300Mbps speed simultaneously.
    • Although it has one LAN and one WAN port to provide cabled connection.
    • WPA-PSK/ WPA2-PSK advanced encryption is used to protect your network.

    WL WN575A2 AC750 Extender Setup Process

    WPS or Web based method, you can opt any of them to complete your WL WN575A2 AC750 extender setup. Both the methods are simple to follow. Let’s move ahead and check out the steps involved in both the methods.

    WPS WN575A2 Extender Setup

    WPS setup is a more quick way to complete the configuration of your device. With the use of this method of setup you can configure your extender device within 10 minutes. Before setup you need to select the mode in which you desire to set up the device. You can use the mode selection button on the device to choose the mode. Steps involved in WPS setup are:
    WL WN575A2 AC750 Extender WPS Setup
    • Firstly, power up your extender device by plug-in into a power socket.
    • Once the device power LED is on and turns solid green in colour you can move ahead.
    • Remember to keep the extender device near to the main router device during the setup.
    • Now press the WPS on your WN575A2 extender device.
    • Hold the button for about 6 seconds and then press the WPS on the router (main host device).
    • You need to press the router’s button within 2 minutes.
    • Thereafter just wait and monitor your extender device.
    • It will reboot itself and once start again check its WiFi LED.
    • If the LED is on and turns solid in colour, it indicates the process is completed successfully.
    In case your setup fails then you need to verify that your ISP has enabled or disabled the WPS function. Some ISP gateways disable WPS function by default so, in that case you should try the Web based setup method given next. If the WPS function is enabled then you may take too long to press the WPS on the router device. Try again by acting more quickly.

    Web Based WN575A2 Extender Setup

    Web based WL WN575A2 AC750 extender setup allows the users to do several changes. You can set your new network separate SSID & password. With the use of a web interface you can update your device firmware, reset your device settings, enhance your device security and much more. Check here the steps involved in the web based setup:

    Place & Power The WN575A2

    • Keep the extender device near to the main router device during the setup.
    • Then power it up by plug-in into a power socket and monitor LED.
    • Once the device power LED is on and turns solid green in colour, you need to take a client device.

    Connect with The WN575A2 Network & Access Wizard

    • Connect your client device (laptop/ PC) with the extender network by searching “WAVLINK-N or WAVLINK-AC” under WiFi settings.
    • Thereafter you need to open a web browser, search for wifi.wavlink.com web address and the login page will open.
    • On this page you need to use default login details as “admin” in both username and password fields.

    Configure The WN575A2

    • Login the page and click on the system setup option and follow the screen.
    • Click on the next option after choosing your language, country, timezone etc.
    • Click on wizard and the setup wizard starts, mention your SSID & password of the host router.
    • Follow the wizard and complete the setup by clicking on the “connect” option at last.

    Relocate The WN575A2 (Optional)

    To enhance your network performance you can relocate your WN575A2 extender device. Must choose a place within the range of the main host device.

    Even yet finding it difficult to complete the WL WN575A2 AC750 extender setup? No worries, connect Wavlink technical team of Tech Support Hub and we will guide you in a better possible way. Our representative will support you on call and provide step by step instructions. Call on the above given number to connect us. In addition to the setup we also can help in troubleshooting the issues you might be facing with your wavlink device.