WL WN578S2 N300 Extender Setup

Live Chat

Struggling with a technical issue? Write to us right away. Our support team often responds quickly.

OR

Don’t want to wait? Call us right away.

Call Now

    WL WN578S2 N300 Extender: Connecting to Your Home Network

    Are you trying setting up your WL WN578S2 N300 Extender but there is some or the other error? If yes, then do not worry as we are here for your rescue. Sometimes even a minor mistake like using an incompatible web browser or a device with pending updates can cause issues during the setup. But with the right instructions and proper guidance you can easily complete the WL WN578S2 N300 Extender Setup process. So without further ado let’s start with the process.
    WL WN578S2 N300

    Reset The Extender For A Fresh Start

    Before you begin with the WL WN578S2 N300 Extender Setup we advise you to reset the extender. This step will erase all your previous settings and will revert the extender back to its factory default settings. To reset the extender firstly, look for the reset button. As you see it, press it down with the help of a paperclip. Press it for at least 30 seconds or until the LED light completely fades away. Now the extender is all ready for the fresh setup process.

    WL WN578S2 N300 Extender Setup Guide: Quick And Easy

    One of the most commonly used and preferred methods for the setup is using the WPS button. The only primary requirement here is that your router should also be WPS enabled. If you choose this method for the setup process then all you need to do is follow these two simple steps:
    • Plug in the range extender into an electrical outlet near to the router.
    • Firstly, press the WPS button on the router and then on the Wavlink Extender. The router and the extender will now start syncing together. Within minutes your setup will be all ready for use.
    And that’s all for the WPS based setup method. Isn’t it super quick. Now, let’s move on to the other method which is web based. So, if your host router doesn’t support the WPS method then you can pursue this one.

    Prerequisites For The Setup

    To make the setup process extremely easy, quick and smooth you should keep these things ready by your side:
    • Firstly, the WL WN578S2 N300 Extender
    • Secondly, the username and password of your current network.
    • Additionally, a user manual that came along with the extender.
    • And lastly, any device like your phone, laptop or your computer system.
    And that’s all for the WPS based setup method. Isn’t it super quick. Now, let’s move on to the other method which is web based. So, if your host router doesn’t support the WPS method then you can pursue this one.

    Power On The Extender

    Before powering it on we need to place the extender strategically in the central location of the home. Make sure you place the extender within the reach of the router as well as near the dead zone. Additionally, remove all the electronic and metal objects that are kept nearby to the extender. As it can mess up the connectivity. So once the extender is placed strategically plug it in and switch on the button. Check the status of the LED light on the extender before moving forward to the next step.

    Connect And Log In

    • Now take any device of your choice. It can be your smartphone, your laptop, computer or your ipad. Go to its wifi settings.
    • In the list of available networks look for the network named Wavlink or something similar to it. To connect your device to the extender click on the network name and then click on Connect.
    • Further, on the same device launch a web browser. Make sure you clear the browser’s caches and cookies and if there is any pending update, install that as well. Now, in the browser’s address bar type 192.168.10.1 and click Enter. The extender’s login page will appear on your screen.
    • Now, you just need to fill up the default username and password. To find exact details check the user manual. As you fill up the details, click on Log In.

    Complete The Setup And Configure Settings

    Lastly, on the login page you can now see the complete list of available networks. Select the name of your home wifi and enter its password. The extender and router will connect immediately. Additionally, follow all the on-screen instructions to complete the WL WN578S2 N300 Extender Setup. On the login page you can also customize various other options. The two most important things that you should immediately do is:
    • Change the default login details. Set your password to something more complex and unique.
    • Secondly, update the firmware as it will improve the overall performance of the extender.
    Once the changes are done do not forget to click on “Save and Apply Option”. During this process the extender might reboot itself so do not panic or perform any action on the extender.

    Relish Your Newly Extended Network

    Finally, connect all your devices to the newly extended network and take a stroll around your home to check the connection. You will now no longer face the issue of lag and buffering or poor connectivity. Rather, every corner of your home will now be drenched with powerful internet signals.

    For any other query or technical help feel free to connect with us.