Aerial HD6 WiFi 6 Setup & Troubleshooting Steps
The Aerial HD6 device is offered by Wavlink. This device has been created to enhance network speed and reduce network congestion. HD6 adopts Wi-Fi 6 technology with dual frequency. Also the device is equipped with durable & weatherproof IP67 enclosure for harsh weather conditions along with MU-MIMO & OFDMA technique and four 8dBi omni-directional detachable antennas. This device setup facilitates high speed internet coverage for scenarios such as outdoor parties, gardens and yard, swimming pool etc. Furthermore, this device setup can give the Internet for surveillance cameras. In addition you can easily configure the device with Wavrouter App and Web UI. You just need to follow the Aerial HD6 WiFi 6 Setup guide. Further section of this page contains step by step instructions to do the setup along with the troubleshooting tips. You can also resolve the issue you may encounter very easily.
Aerial HD6 WiFi 6 Setup Process
Aerial HD6 WiFi 6 setup may involve following steps, you need to follow them as mentioned and complete the configuration.
- First you need to assemble the device. Connect all the parts.
- Place the device on the wall or pole where you want to install.
- Plug-in the device power adapter in the power outlet.
- Thereafter you need to connect it with the PoE converter using wire for router/AP mode setup and connect wirelessly for repeater/ mesh agent setup.
Wavrouter App Setup
- Download the Wavrouter app on your mobile phone from Google play store or app store.
- Let the installation complete and open the application.
- Thereafter, open the app and login by using default details (admin in both user ID and Password field)
- User dashboard will open on the screen from where you have to look for new network setup option
- Follow the on screen instructions and choose your existing network
- Provide the password and then create new details for your new network.
- Made necessary changes by following the instructions on the app screen.
- Complete the configuration and save them at last by clicking on save option.
Web UI Setup-WiFi Selection
Connect to PC
- Use an ethernet cable and connect the one end in the ethernet port of PC
- Connect the other end in the PoE converter.
- You can also connect to the PC by using WiFi. go to the WiFi settings and connect to the new device network.
Open Web Interface
- In computer, open a web browser of your choice and type “waplogin.link” or “192.168.10.1” in address bar
- Web interface will open, login on the page by using default details as “admin” in both username & password section.
- Now, select your country/ region and time zone
- Thereafter follow on screen instructions and choose the mode in which you desire to set up the device.
- Thereafter you need to choose the “select WiFi” option and hit on the next option
- Choose your network name and enter the password of your wireless network.
- Afterwards make changes in the new network SSID and password.
- Finally, save the changes you have made and complete the device configuration.
Aerial HD6 WiFi 6 Troubleshoot
Troubleshooting errors is very simple. First you have to identify why you are facing the issue. To identify you need to verify the following things:
- Internet connection via main access point.
- Cables connected with the device
- Placement of the device
- Firmware updation
- If internet connection is not working through the main network device then connect your ISP. Any damaged cable found, replace it
- Device is placed too far from the main device, reposition it.
- If firmware update is pending then install it
Reboot The Device
- To reboot your device you need to unplug the power adapter from the power plug.
- Wait for about 30 seconds to a minute and then re-plug the adapter back.
- This will resolve temporary connectivity issues.
Reset The Device
- To restart your Aerial HD6 WiFi 6 device you need to locate the reset button
- The button is available on the front of the device.
- Press the button and hold it for about 6 seconds.
- Let the device restore to its factory settings.
- The device will reboot itself automatically.
- Once the device starts again, you can re-configure the settings.
- This will resolve the issue and fix the bugs. In case the problem persists with your device then you should connect with a tech expert.