Eero extender devices are widely used to boost the network coverage of the router devices. In case you are experiencing a Wi-Fi dead zone at your home or office space then you must add an eero extender device to your networking system. This device will take the signals from your router device and rebroadcast them to the area where your router is not able to reach. Configuration of an Extender device is not a hard task if you are aware of the process. By reading the further section of this article you will be able to know how you can proceed with eero extender setup. We have specified the process step by step. Check out the steps below.

Place The Extender

Begin the process with the placement of your Arrow extender device. Make sure to place the device next to your router device so it can easily be connected via wireless network with minimum interruption.

Power Up The Extender

Using the power adapter you need to start the device. Connect the extender with the power and wait for its LED to get stable. 

Connect To Extender Network

Moving further in the arrow extender setup process you need to connect your client device with the arrow network. You have two methods to connect your device with the network. Wired method connection required ethernet cable to connect the devices. Make sure your client device has an Ethernet port for the connection. Where the wireless method requires wireless network details for the connection. Rush to the wireless settings on the device and search for the extenders network to connect.

Launch Web Browser

Step forward in the eero extender setup process and launch a web browser in which you are going to access the setup page.

Access Setup Page

Specify the IP address to open the extender setup page. After that to reach the dashboard you have to specify the standard login credentials. Submit the details and you will reach the dashboard.

Configure Settings

As you get the access of the dashboard first you have to change the standard login credential. Moving further you have to connect your Arrow extender with the router device using the routers network name and password. After that change the standard SSID and password of your Arrow extender network to keep it secure. 

Finalize Setup

Lastly you have to submit the changes done by you. Hit on the submit and apply option. Don’t forget to test the network once the setup is complete. 

Connect Us 

You can easily connect to our support team in case you’re facing any difficulty in completing the eero extended setup process. The process will begin with the placement of the device and ends with the testing of the network. In the whole process you might experience issues if even a single error is committed by you. So be careful while applying the steps mentioned above. But if even then you are facing trouble then you need technical support. Connect our technical team for help. Hurry! Call Now!