TP-Link wifi extender setup process is very easy. It won’t take more than 5 to 7 minutes for you to complete it successfully. In case you are someone who does not know even the basics of technology then instead of doing the setup on your own, you can connect to our experts at Tech Support Hub. We provide both forms of assistance that are on-site and remote. So you can select one, which aligns with your exact needs. Now who can conduct the setup process without any expert assistance, can check out the further blog-post for accurate guidance.

TP-Link Wifi Extender Setup Steps

First collect the setup components. Basically for the setup you need:

• Most crucial, your TP-Link wifi extender.
• Its power adapter.
• A router with WPS function.
• A well-working power socket. 
• Lastly, a well-working internet connection.

With this you are all set for the installation of the device. The accurate steps for it are as follows:

• Start by placing the TP-Link unit near to the router. 
• Now fetch the power cable. Insert it into the TP-Link’s power port. Thereafter move it into the power socket. Switch the power button towards On position.
• With this the signal repeater activates. It requires a few moments to boot up. So do not rush to the next step immediately. 
• Now click the Wifi protected setup (WPS) button on the router. As you do so the WPS indicator will blink. If it doesn’t blink then press it again till it starts to flicker.
• Move ahead, and without wasting a single second, click the WPS knob of TP-Link extender also. Its WPS indicator should also blink. 
• Finally, the syncing lasts for about two minutes. So meanwhile all you can do is wait. After completion of two minutes, you’ll see the WPS indicators are all lit up. It means the TP-Link wifi extender setup is done successfully. 

Reposition The Device 

As the setup process finishes, you have to unplug the TP-Link unit and for eradication of dead zones and other connectivity problems, you need to place it strategically in your abode. Follow these below-written guidelines for the same:

• Plot the TP-Link wifi extender setup in an open area that provides complete ventilation. 
• Ideally, you should plot the unit in between your router and the area where you need extended signals.
• For better experience, avoid the placement where electrical and metal appliances like microwave, refrigerator, cordless phones, aluminium doors, vigilance cameras, baby monitors, fish tanks and such other objects of similar nature are present. 
• Additionally, never keep the networking device in a box, behind walls or near a huge furniture set. 
• Always plot it on spots that have higher elevations like on a table top, on some shelf or the best one is to mount it directly onto the wall. 

After placement, as soon as you provide power to the extender, it will automatically sync back with your host device which is the router. Now connect your smart device to the new network. The password is exactly the same as that of your host device. Visit the area which forced you to invest in the wifi repeater. And now stream high definition content. If the speed, connectivity and everything is top-notch then well and good. But if you come across any problem with the TP-Link wifi extender setup then try moving it a little away from the router and closer to the dead zone until the connectivity is proper.