Hyzom extender are used by the people to extend their existing network’s signal strength. A single router device is not enough to create a reliable network. To get strong signals across your space you have to set up additional networking devices. Hyzom Extenders are a perfect option to enhance the reach of the signals. An extender device receives signals from the host router device and then extends it further to the location where the router device is not able to deliver signals. Hyzom extender setup is not a daunting task to perform. Anyone can add the device into their existing network by following our guide. This guide contains step by step details to add the device into the network. 

Extender Setup Step By Step

Now you can create a reliable network using the hyzom extender. hyzom extender setup process includes following steps: 

Install And Power Up 

First and foremost step of the setup process is installation of the extender device. Keep the extended device closer to the router device. Power of the extender using the power outlet and turning on the power. Wait for the extender to boot up properly. Now you can initiate the hyzom extender setup process further. 

Connect Phone With Wifi 

Second step of the setup process is to connect your device in which you are going to use the web interface to the hyzom extender network. Access the settings and search for the default extenders network name. Connect with it using the password mentioned on the label of the device. 

Assess User Interface 

Now you have to proceed towards the hyzom extender setup using the web interface. First of all, launch a web browser whichever is installed in your device. Thereafter you have to mention the IP in the address bar. Hit on the enter option. As the page appears you have to get the access by using the default admin details. 

Configure Extender 

As you get the access to the settings, you can proceed with the setup. First of all you have to select the mode as repeater mode. Thereafter you have to create a username and password for your network. Click on the next button and make the changes in the security settings. Also check for the firmware update and end up the configuration. Press the submit button to finalise the setup. 

Test New Network 

Lastly you have to test the new network you recently created. This test is to verify that your hyzom extender setup is working properly or not. Use a WiFi enabled device to browse the internet using the new network. To establish connection between your Wi-Fi unable device and extender you have to use the new wireless network name and password you just created. Browse the internet by searching websites, playing online videos and games. Verify the speed of the network. If required you can relocate the extender device to optimise the network performance. 

Final Words 

Feel free to connect our technical experts in case you need technical help. Our team is ready to help in setting up the device. Also we can help you in troubleshooting the problems and boosting your network performance. For more information connect us.