Upgrading the network is not a difficult task if you are using additional networking devices at home or office networks like hyzom extenders. Hyzom extender device will lift your router signals to the hard to reach point in your location. This device will strengthen the signals and boost the performance of your wireless network. An extender device works as a bridge. It conveniently receives signals from the router and extends them ahead. With the right hyzom extender setup steps you can add the device to your home or office network. Guide to add the extender are given further on this page, scroll and read.

Hyzom Extender Setup Steps

Setting up the hyzom extender device is not so difficult if you follow these guides. The steps specified here will help in configuring the device easily:

Power On the Extender

Begin by plugging your Hyzom WiFi extender into a wall socket. Ensure it’s placed near to your main router. Placement closer to the router during the original setup helps the device to communicate easily. Stay until the power LED light on the extender turns solid, indicating that the device is ready to configure.

Connect to the Extender Network

Laptop, smartphone, or tablet use anything to proceed with the setup and rush to the WiFi settings. Search for the extender’s standard SSID, most of the time labelled as “Hyzom_EXT” or as mentioned in the stoner primer. Connect to this network without entering a passkey. Must check the label if there is a passkey specified then use it as your extender network is not open. It is secured with a default key.

Access the Setup Page

Once connected, open a web cybersurfer on your device. Rush to its address bar. Type the standard web address or IP address specified in the extender manual (generally like 192.168.10.1). Press enter on the keyboard. Enter the standard login credentials here. Generally “admin” for both username and passkey is the login credentials. If you have been given different details, enter those as per your user manual.

Start the Setup Wizard

Extender’s configuration dashboard will open as you enter the admin account. Select the option to start the Hyzom extender setup wizard. The wizard will overlook available WiFi networks. 

Select Your Main WiFi Network

From the list of available networks, choose your home or office router’s WiFi name (SSID). When urged, enter your router’s WiFi passkey precisely to establish a secure connection between your router and the extender.

Confirm and Save Settings

After entering the passkey, click on the confirm or apply button. The extender will take many moments to connect to your router. Formerly successful, the extender will start broadcasting the extended WiFi signal.

Reposition the Extender

Unplug the extender and move it to a new position, ideally half between your main router and the area with weak or no signal. Make sure the signal strength index on the extender shows a good connection. However, in case you find the signals are too weak move it more closer to the router device.

Conclusion

At the end, we rest the topic by saying that the Hyzom Extender Setup is the easiest task. Anyone can do it without having technical knowledge with the right guidance. Yet if you encounter any trouble then call on our given contact and our respective team will assist you.