Kuwfi Router Setup

Live Chat

Struggling with a technical issue? Write to us right away. Our support team often responds quickly.

OR

Don’t want to wait? Call us right away.

Call Now

    Gather All Details About The KUWFI Router

    Kuwfi is a mesh WiFi router device that helps to extend the range of the WiFi signals. It offers you 100% internet speed in all the zones of your house. The login and installation process of the Kuwfi router is simple and not so complex. The Kuwfi dual-band mesh WiFi router supports both 2.4GHz and 5GHz bands. To learn more information about this Kuwfi device, read this page’s directions.
    Kuwfi Router Setup

    LEDs Status Of Kuwfi Router:-

    Blinking Green:- The blinking green LED defines that the Kuwfi router finished the booting process and now the device works normally.
    Blinking Orange:- The sync process is being processed between master and satellite.
    Blink Alternately Between Green And Orange:- This LED light starts blinking when the reset process is being processed.
    Satellite Solid Orange LED:- The router and satellite failed to sync. The connection between the router and the satellite is not good.
    Satellite Blink Solid Green LED:- The satellite is successfully synced to the router and the connection between them is good.

    Button On Kuwfi Router:-

    You can see many buttons on the Kuwfi router. To know more about them, read low directions:-
    Reset Button: After doing the login and setup process of the Kuwfi router if your device does not work properly then you can use this button to reset all the router’s previous settings.
    WAN Port:- Connect one end of the network cable to the modem.
    LAN Port:- Attach to the PC or switches with the help of an ethernet cable.
    DC Power Socket:- Join an electrical power outlet with a powered supplied adaptor.

    Access Kuwfi Router Login And Setup Process

    First, join one end of the network cable to the modem and the other end of the cable to the router’s WAN port. After that, by pressing the Kuwfi router power button, turn it on. Now, connect your WiFi device to the Kuwfi router default network. Next, launch the web browser on the connected unit and type 192.168.188.1 IP address in the URL bar.

    Later, fill in the details that show up on the Kuwfi router login page. Hit on the login button and tap on the quick setup option. Pick up the connection type that you want. After that, make a WiFi network name and security password. Thereafter, hit on the create an administrator login password. In the end, hit on the done button to complete the Kuwfi router configuration process.

    After the Kuwfi router setup process if you are facing any error in your device such as the gadget not working properly or any issue. Then don’t worry try the below troubleshooting tips to fix an error:-

    Troubleshoot Errors Of Kuwfi Router:-

    There are so many ways by which you can fix the Kuwfi router:-

    Update Software Of Kuwfi Router:-

    To upgrade the software of the Kuwfi router, you will need to access the login page. But make sure that your WiFi gadget is linked with the Kuwfi router default network. After visiting the login page, look for the network administrative option and then choose the software upgrade option. Now, if there is any latest software file, then install it on your computer or laptop. The latest software file will take a few minutes to download.

    Power Cycle Kuwfi Router

    First, press the power button of your host router. After that, take out the Kuwfi router power plug from the socket. Now, wait a minute and place the Kuwfi router power plug back into the socket. In the end, punch the router power button again to turn it on back.

    Locate Kuwfi Router At Central Location

    We recommend that you locate your Kuwfi router device at the mid-way location of your workplace. When you are doing this solution tip process, then make sure that your router isn’t located closer to the metal or electronic type of appliances. That kind of gadget absorbs WiFi signals that come from the Kuwfi router.

    Punching The Kuwfi Router Reset Button

    By resetting all the previous settings you can fix any error. For this process, you will require a paper clip. After that, look at the reset button on your router. Next, press the reset button for two minutes, until all the LEDs of the Kuwfi router turn off. After all LEDs are turned off, your gadget is completely reset now.

    Note: After resting the Kuwfi router, you will be required to do the Kuwfi wifi router setup and login process again.

    After the entire study of this page, you will get all the information about your Kuwfi router device. If you have any queries or questions in your mind regarding the Kuwfi device then feel free to ping our technician expert. The technician will help you in that case.