Linksys RE7310 Extender Setup

Live Chat

Struggling with a technical issue? Write to us right away. Our support team often responds quickly.

OR

Don’t want to wait? Call us right away.

    Step By Step Linksys RE7310 Extender Configuration Guide

    Do you want to extend internet speed? If your response is yes then we are here for you. By installing Linksys RE7310 WiFi range extender at home or office you can increase the speed of the internet. Now, let’s begin the process:-.

    Go To Linksys Website

    To visit the Linksys default website, consider all the lower prompts step by step.
    • In the socket, place RE7310 Linksys extender plug.
    • Now, press the power button to turn on RE7310.
    • After that, take the computer or any other WiFi device and connect it with the RE7310 Linksys extender default WiFi network.
    • Later, on the connected WiFi unit, open the browser and type default website extender.linksys.com in the address bar.
    • Fill in the login page details and hit on login.
    By following all the apart directions you may easily access the Linksys default website.
    Linksys RE7310

    Establish RE7310 Extender

    There are several methods to configure Linksys RE7310 extender. Let’s study all the methods briefly one by one.

    By Pushing WPS Button

    Essential Note:- Make sure while doing WPS method your existing router must support the WPS button. For this, place the extender power plug in the working socket and press the RE7310 extender power button to turn it on. Now, look for a WiFi protected setup button. Further, hit both the extender and router WPS button. By pushing, the WPS setup method is under process. After completion of the process, from the socket take out the Linksys RE7310 extender power plug. Place extender in that area where you are facing slow speed internet issues.

    By Using Browser

    • Early, repeat the same process and place the extender plug in the socket.
    • After that, take WIFi device and connect with Linksys extender default network.
    • Now, on a connected WiFi unit open chrome and type extender.linksys.com in the URL bar.
    • Further, tap on start configuration option.
    • Pick as the wireless range extender option.
    • From there pickup your WiFi network and make a security password.
    • Next, click on the apply save button.
    • In the end, connect your WiFi device with the Linksys RE7310 extender default WiFi network.
    After trying the directions of two methods if you face any issue such as the extender not working properly, face slow internet speed, or some other issue. Then don’t worry just try the below solution tips to fix the issue.

    Troubleshoot Tips To Fix Extender Issue

    There are a number of solution tips. By trying the steps of those tips you can quickly fix the issue.

    Changing Placement

    The placement of the extender plays an important role in its working. Make sure that the RE7310 Linksys extender don’t be located closer to the metal or electronic appliances. The electronic units absorb the WiFi signals which are coming from the extender and router. Also check that the extender must be located near the host router.

    Update Software Time To Time

    To update the software of Linksys WiFi range extender, you will need to go to Linksys official website. Follow the below prompt to access Linksys web page.
    • Take a WiFi device and connect with the Linksys extender default network.
    • Now, type extender.linksys.com in the WiFi connected device web browser at the URL bar.
    • After that, fill in the default information.
    • Now, click on the network administration option and then look for the software installation option.
    • If there any latest software file is pending then install them.

    Power Cycle RE7310 Range Extender

    To power cycle the WiFi range extender, press the power button to power it off. Now, take the plug out from the electrical socket. Wait for a few minutes and put the plug back in the socket. At the end, press the power button again to turn it on back.

    Reset RE7310 Extender

    By resetting all the previous default settings of Linksys extender you can easily fix any type of error within a few minutes.

    For this process, take a pin and put it into the RE7310 Linksys extender reset hole button for 10 seconds. After putting the pin all the LEDs of the Linksys RE7310 extender will be turned off. All off LEDs of the extender define that the unit is completely reset now.

    Important Note:- After resetting the extender, you will be required to do the login and configuration process again.

    For more updates on Linksys or having any query on Linksys, just reach our Linksys team expert.