Let's Master Linksys Velop MX5503 Setup
Have you finally got your hands on Linksys Velop MX5503 Setup, if yes then congratulations you have made a perfect choice. So if you are looking for a super easy setup procedure then you have arrived at the perfect destination. Today, we will guide you on how to set it up and in case you are facing any troubles we will also provide some Troubleshooting Guidance. So without further ado let’s begin.
Linksys Velop MX5503 Setup Guide
Unbox And Collect
Start by unboxing the Linksys Velop and collect all the components. Inside the box you will get:
- 3 Linksys Atlas Pro 6 Mesh Wi-Fi Nodes
- 3 Power Adapters
- 1 Ethernet Cable
- A User Guide
Strategic Node Placement
Always remember that placement is the key. Strategically place all three nodes in your home. Make sure to place them in such a manner that they cover your entire area and are placed away from any kind of physical obstacles like walls, heavy doors, or electronic devices as they can mess up the entire signal. Once you place them properly it’s time to move on to the next step.
Power Up The Nodes
Now with the help of the given adapters, start plugging in the nodes into an electrical outlet. Make sure that each node gets a proper and uncut supply of electricity. Once you connect them make sure to wait for a few seconds to let the LED lights on them stabilize and boot them up completely.
Connect Your Computer
Now it’s time to connect the nodes to your computer system. For establishing a successful connection between the node and the computer make use of the provided Ethernet Cable.
Access The Setup Page
On your computer, launch a web browser of your choice and in its address bar enter “192.168.1.1” or “https://linksyssmartwifi.com” and Press “Enter”. Once you do so, you will reach directly to the Linksys Velop MX5503’s Setup Page.
Create An Account And Follow The Instructions
On the setup page, you will be asked to either login or to create a new account. So just follow the on-screen prompts and you will successfully log in to the setup page, where you will be guided by the screen itself. So just start following all the on-screen instructions which includes choosing the type of internet connection you have and performing certain necessary settings.
Finalize The Setup And Connect Wirelessly
After completing the setup, you can remove the Ethernet cable as now your devices are ready to connect to the new wireless network.
With its successful setup, you will be able to see the instant magic. There will be no pesky dead spots, and the lags and buffering will vanish completely. There will be faster internet speeds and the whole place will be drenched in seamless internet connection.
Troubleshooting Guide For Linksys Velop MX5503 Setup
Sometimes even after performing all the steps cautiously, the network or the device decides to throw tantrums. In case you also face the same issue then do not worry we are here to your rescue. Below mentioned are some of the troubleshooting tips and tricks that will definitely solve your issues.
Check Power And Connection
Make sure that all the three nodes, your computer system and every device that is involved in the setup process have a proper supply of electricity and are securely connected. See whether the power adapters are tightly connected to the nodes or not. It’s always a good idea to choose an electrical plug that has a connection with the inverter so that it always has a proper flow of electricity.
Verify Placement
As said earlier, placement is extremely crucial for the optimal working of the Velop system. So make sure that each node is placed at an equal distance from each other. Switch off all the unnecessary electrical equipment especially if you have ovens, microwaves and cordless phones near the nodes as they can mess everything up.
Restart Devices
Restart the primary node, secondary nodes, modem, and your computer system. One simple kick of restart can solve major connectivity and performance issues.
Device Limits
Although Linksys Velop MX5503 Setup can easily handle multiple devices, there is a limit to everything. So ensure you haven’t exceeded the recommended number of connected devices.
Network Name And Password
Recheck whether you are using the correct username and password as one typing mistake won’t let you enter the login page. Read the user manual carefully to know the exact login details. Keep a close check on upper and lower letter cases.
Reset To Factory Settings
As a last resort, perform a factory reset on the units and set up the network all over again. For resetting the device, press and hold the reset button with the help of a paperclip till the light on it completely fades. Once done, restart the setup process from the beginning.
If still the problems persist, consult the Linksys support website or contact their customer service for further assistance.