Linksys Velop WHW0102 Setup

Live Chat

Struggling with a technical issue? Write to us right away. Our support team often responds quickly.

OR

Don’t want to wait? Call us right away.

Call Now

    Linksys Velop WHW0102 Setup - A complete gude

    A robust and reliable network is essential for seamless connectivity and better internet experience. Many devices are available in the market who promise to offer superior coverage and speed throughout your home. Out of all the devices, Linksys Velop WHW0102 stands out as a leading solution. It is a mesh wifi 5 system with dual band support. This system is a combination of elegant design and high-performance technology.

    Whether you are streaming high-definition content, gaming online, or working from home Velop WHW0102 will prove to be a perfect companion. Furthermore, Linksys Velop WHW0102 Setup process is super easy. Regardless of technical expertise, you can manage the network by your own.

    Linksys Velop WHW0102 Setup

    An Outline of Linksys Velop WHW0102

    Linksys Velop WHW0102 is a dual band mesh WiFi 5 system with the coverage of up to 3000 sq ft. The device is equipped with 716 MHz Quad Core processor, 256 MB NAND Flash & 256 MB DDR3 memory, three internal antennas and high powered amplifiers. Moreover, it has many attractive features including:
    • Auto Firmware Upgrade
    • Parental Control
    • Speed test support
    • Auto Wi-Fi Channel
    • Bluetooth 4.1 embedded
    • Easy App Controls
    • Guest Access
    • Auto sensing WAN/LAN Ports
    • Intelligent MeshTM Technology
    • Spot Finder
    • Wired/Wireless Backhaul
    All the above mentioned features make it the best mesh system. By using this system at your home, you will experience extreme internet coverage & flawless speed.

    Linksys Velop WHW0102 Dual Band WiFi Unboxing

    Linksys Velop WHW0102 Dual Band WiFi 5 device unboxing is equally important. You must know what exactly you will get. In the box you will get the things listed below:
    • Two Linksys Velop
    • One Ethernet cable
    • Two Power adapter
    • Quick Start Guide
    • Printed Documentation

    Linksys Velop WHW0102 Dual Band WiFi Setup

    Once you are done with the unboxing you need to move further with Linksys Velop WHW0102 setup steps. We elaborate the steps to follow here in detail. These steps will help you in configuring your device without any issue. Let’s begin with the process:

    Power up the Velop WHW0102

    First of all, you have to supply power to the device. Plug one end of the adapter in the node & other in the power outlet switch. On the power plug & let the LED of the node become solid purple in colour.

    Connect the node & modem together

    Thereafter you should connect the node & modem with each other. For connection between the devices you need an Ethernet cable. By inserting the ends of Ethernet cable in the Ethernet port of modem and node, both get connected.

    Linksys Account Creation

    Third step in the process is a Linksys account. To create an account, you need the Linksys app. You can find the app in the google play store & app store. Further you need to go & get the application downloading done.

    After downloading the app, you need to run it and follow the instructions shown to create an account. Email verification is the most important step in the account creation process. If you don’t have an email, create that first before proceeding with the Linksys account.

    Connect The Node

    Once you are able to access your Linksys account, you should go to the menu bar and click on the “Set Up a New Wi-Fi Network” option. Thereafter you need to follow the screen & let the app complete the configuration.

    Additional Nodes setup

    Linksys Velop WHW0102 Setup

    To add another node in the network you need to wait till primary node configuration is complete. Then you need to plug-in an additional node in the power outlet. Place the additional node in the weak signal zone yet within the range. In the app choose add another node and follow the screen to complete the process. Thereafter wait for the completion of the Additional node setup, click on finish setup option in the app.

    Note: You will see solid blue light on the node LED, once the Linksys Velop WHW0102 Setup is done correctly. In case, there is any error like node is not able to connect with primary node, LED starts blinking red whereas turns solid red if lost internet connection etc. Must focus on the LED light of the node during the configuration process.

    Linksys Velop WHW0102 Setup Troubleshooting

    Some common errors you may face while proceeding with the setup process. For example
    • Connectivity Issues
    • Node Not Found
    • Wi-Fi Signal Issues
    • Password and Network Settings Issues
    • App Not Working
    • Node Not Syncing
    By follow the troubleshooting points mentioned here, you can solve the issue:
    • Check the internet connection on your client device.
    • Restart the node & your device, then try again.
    • Position the node closer to the main router during setup.
    • Avoid placing electronic devices near your node or modem like microwaves or other such radio frequency devices.
    • In case, app is not working, try to reinstall the app on the device or use another device.