Experience Blazing Fast Internet Everywhere With Macard Extender Setup
Have you tried everything but aren’t able to set up your Macard Extender? Do not worry we are here for the rescue. But before we begin with the Macard Extender Setup let’s perform some necessary steps for the optimal setup.
Have you tried everything but aren’t able to set up your Macard Extender? Do not worry we are here for the rescue. But before we begin with the Macard Extender Setup let’s perform some necessary steps for the optimal setup.
Factory Reset
Factory Reset can clear any previous settings and restore the extender to its default state. This ensures that you start with a clean slate and can set it up properly without any conflicts or issues. It’s like giving it a fresh start. So here’s how you can do a factory reset.
Take up your Macard Extender Setup and look for the reset button which you can find by turning your extender upside down. Once you find the reset button press and hold it for about 9 to 10 seconds and then release the button. Wait for a minute or two to let your extender turn to its original settings.
Strategic Placement Of Macard Extender
Placement is very crucial for the extender to work properly. Hindrances like thick walls, metal objects, and appliances like microwaves, ovens, cordless phones, etc can mess up the signal and connectivity of the extender. So for the better performance of the extender make sure you choose the place that is halfway between the router and the place where you need the extended coverage. Now let’s move on to the setup process.
Macard Extender Setup Guide
Macard Extender setup is super easy and simple to perform. You just need to follow the below-mentioned steps to get through the same.
- Power up the extender: Plug the extender into a power outlet and wait for it to turn on. You should see the LED lights on the extender indicating that it’s powered up and ready to go.
- Connect to the extender: Now take up your device like a phone, tablet, computer, or laptop and go to the Wi-Fi settings. In the list of available networks look for the network name of Macard extender. It is usually mentioned in the extender’s manual. Connect to this network to establish a connection between your device and the extender.
- Access the setup page: To access the setup page open a web browser like Safari, Chrome, or Mozilla Firefox and type in the default IP address of the extender. The default IP address is http://192.168.10.1 or http://go.macard.online. This will take you to the extender’s setup page where you can configure different settings.
- Follow the setup wizard: The setup page will guide you through a series of steps to connect the extender to your existing Wi-Fi network. You’ll be asked to enter your Wi-Fi network’s password during this process. Just follow the on-screen instructions to complete the setup.
- Test the connection: Once the setup is complete, it’s time to test the connection. Connect your device to the extender’s network and check if you have a strong and stable Wi-Fi signal. For the same, go to the different areas of your home and start streaming movies or gaming to check whether there is smooth connectivity or not.
That’s the detailed breakdown of the Macard Extender setup process. But if you still aren’t able to set up the extender then continue reading forward.
Troubleshooting Tips And Tricks
- Check whether both the router and extender are getting proper electrical supply or not. While setting up the extender if you are using the smartphone then make sure its mobile data is turned off.
- Sometimes, clearing your browser’s cache and cookies can also resolve login issues. For doing so go to your browser’s settings and clear the cache.
- Try rebooting your extender by unplugging all the power cables from the router and then wait for 30 seconds to 1 minute, then plug them back in. Allow the devices to restart properly.
- Make sure your computer, smartphone or any smart device that you are using has been connected to the extender’s network and not that of your router.
- Carefully enter the password as well as the default IP address because the wrong information won’t let you set up the extender.
- Regularly check for updates for your Linksys Extender to ensure the best performance and security as well.
Troubleshooting Tips And Tricks
- Check whether both the router and extender are getting proper electrical supply or not. While setting up the extender if you are using the smartphone then make sure its mobile data is turned off.
- Sometimes, clearing your browser’s cache and cookies can also resolve login issues. For doing so go to your browser’s settings and clear the cache.
- Try rebooting your extender by unplugging all the power cables from the router and then wait for 30 seconds to 1 minute, then plug them back in. Allow the devices to restart properly.
- Make sure your computer, smartphone or any smart device that you are using has been connected to the extender’s network and not that of your router.
- Carefully enter the password as well as the default IP address because the wrong information won’t let you set up the extender.
- Regularly check for updates for your Linksys Extender to ensure the best performance and security as well.
If you have tried all the troubleshooting tips but still it is not working then feel free to contact the Macard customer support team for guidance.
Concluding Remarks
Although the Macard extender setup is super easy and straightforward, sometimes it becomes a difficult task to get through it. But when you follow the above-mentioned steps carefully and precisely you’ll surely be able to set up the extender easily. In case nothing works, perform a factory reset and restart the setup process all over again. At last, if factory reset doesn’t float your boat then feel free to contact the Macard Customer Service team.