N Radio Router Support

N Radio Router Setup Instructions

Here are some key-pointers that you should consider before initiating the setup process.

✓ Select The Right Placement Spot

First it’s important to find out the right placement spot for the router. Placing the router in between thick walls be it of concrete or glass can stop the signals from travelling properly. Therefore hunt out the spot that is free from physical obstructions including electronic and metal objects. It’s better if you place the router in a central location or in an area where you require the access to the internet the most. 

✓ Give Quick Reading To The User Manual

Moving further, every N Radio router comes with a user guide. So it’s advisable to have a quick reading of the same. As it contains every little information that can help you with the first time setup as well as with troubleshooting minor issues independently. Thus minimizing the need for connecting to the N Radio Router Setup Support team. 

✓ Factory Reset For A Fresh Setup

In case you had already tried setting up the router on your own, but couldn’t complete it or the setup wasn’t successful, then in that case a factory reset is a must. As it will revert the router to its original settings. For a reset first ensure the N Radio router is on. Now using an object called a paper clip or something that looks alike, push the reset knob and hold it on. Hold till the router’s front panel LED light starts flickering. Upon release the router will reset to the factory settings. 

✓ Connect To N Radio Router Setup Support 

In case you are not sure whether you’ll be able to get through the setup process then instead of performing it on your own, it’s advisable to directly get in touch with the N Radio Router Setup Support team. Otherwise there are chances you might end up causing irreparable damage to the router. 

Setup Guidance 

The N Radio router setup steps are extremely easy and straightforward. Therefore the whole process doesn’t take up much time. Here’s every single step that you need to perform:

✓ Unbox And Collect

Start the process by carefully unboxing the N Radio router package. Inside the box you’ll find 4G LTE Router, a USB-C power cable alongside the power adapter. Additionally a sim ejector pin and an installation guide. Before proceeding further, check whether each component is in top-notch condition or not. If there is any part that is missing or is damaged, then get it replaced immediately. In case you do not know how to initiate the same, then do not hesitate to connect with the N Radio Router Setup Support team. 

✓ Insert SIM And Power On

Now before you power on the N Radio router, insert the Nano SIM card into the sim card tray. Make sure the chip side of the sim is downwards. And thereafter gently close the compartment. Moving further fetch the USB-C power cable. Insert its one end into the power port of the N Radio router and other side into the power adapter. Now plug in the adaptor into a properly working power socket. Turn it on. Initially you’ll see the blinking blue light, which depicts the router is booting up. Wait until the LED stabilizes. 

✓ Access The Internet

Now to access the internet, pick any of your smart gadgets. Visit its wifi settings to turn on the wifi. In the list of available networks search for network names: @NRadio-xxxx-2.4G or @NRadio-xxxx-5G. As you tap on the network name, you’ll be prompted to enter the password. The same is 12345678. Although the setup process is quite straightforward but in case you face any issue then fortunately N Radio Router Setup Support is here to help.

✓ Configure Settings 

We all understand the importance of secure networks in today’s world where cyber crimes are very common. Therefore the first step towards securing the network is to assign it a strong password. To do the same, you need to login into the router from a device that is connected to the N Radio router. You can connect it either through an ethernet cable or through wifi. 

Now, from your connected device launch a web browser. Hop on to its address field. In it enter http://1192.168.66.1. Now the login window will pop up. Enter the default password and hit the Login option. Moving further, from the home page select the Wireless settings option, modify the settings as per your need and lastly tap on Save and Apply. 

Finally you now need to reconnect your devices by using the new password that you just assigned. 

Troubleshooting Guidance 

Sometimes even after performing everything correctly, the router might act differently. So in that case you can either get in touch with the N Radio Router Setup Support or first follow a few basic troubleshooting methods on your own. 

✓ In case you are unable to get entry into the web management page, then first ensure your computer is assigned to obtain the IP address automatically. Next ensure you use the right IP address as one single mistake won’t let you access the page. 

✓ Moving further, sometimes a simple restart can solve all the connectivity issues. Therefore to restart, first disconnect all your gadgets and then the router from the power socket. Wait for not less than a minute and then replug. 

✓ Additionally, check the cable connections, it shouldn’t be loose. Moreover the supply of electricity should be proper and consistent. Also check for the pending firmware updates. 

✓ If nothing works head towards the factory reset and redo the setup from scratch.