Reyee REX12 Extender Setup

Live Chat

Struggling with a technical issue? Write to us right away. Our support team often responds quickly.

OR

Don’t want to wait? Call us right away.

Call Now

    From Box to Connection: Reyee REX12 Extender Setup Essentials

    Are you frustrated because of your non competent wifi network system?

    You are not the only one. Many people face poor wifi signals and slow speeds. But you can be different by choosing the Reyee REX12 extender. Because the problem with the wifi networking gadget can last long if you do not do anything about it. You may expect the best speed and uninterrupted connection from the Reyee extender. But you have to perform the Reyee REX12 extender setup accurately for that.

    Reyee REX12 Extender

    Quick Overview Of The Product

    The Reyee REX12 extender is a compact and powerful internet device. It receives signals from your existing wifi device. Then it improves its speed and coverage capacity. By doing so the Reyee extender covers every corner of your house and eliminates all the dead spots. In addition, various features from the technical point of view are given below:
    • Advanced router model with sharp edge exterior.
    • 8 omnidirectional antennas with 4+4 with high-power FEM amplifiers.
    • Dual-band signal with a 5G rate of 2400 Mbps and 2.4G rate of 800 Mbps.
    • It can provide the fastest internet to up to 78 devices.

    No Idea About Configuration?

    It happens with the best of us. So, you do not need to hesitate before seeking help. Although the user manual guide provides you with some information it is not enough to install your device. In addition, it is a small booklet so it gets lost most of the time. But again, we are here to provide all the information you may need while setting up the extender.

    The First Thing To Do

    First of all, open the box of Reyee REX12 extender and then check all the items. The package should contain
    • Reyee REX12 extender device.
    • An ethernet cable.
    • A warranty card.
    • A user manual guide.
    In addition to the number of items, also inspect these factors.
    • First, the box should be sealed.
    • No component should be damaged in any way.
    Call the seller immediately in case of any issues.

    Initial Setup Of The Hardware

    There are a few things that you have to do before starting the main installation process. Although you can do them while setting up the process. But that can cause aggravation and frustration. So, the smart way is to prepare most of the things before. It helps save time and makes the procedure smoother too.

    Placement

    The place you choose for your extender plays a vital role in its performance. So you should choose the place wisely. Keep the following factors in mind while placing your range extender:
    • First, it should be an open area. No walls or big objects should block its view.
    • Place the extender halfway between the main router device and the areas where the signal is weak or non-existent.
    • Remove electromagnetic devices to prevent interference in the signal quality.
    • You can use the Spot Finder feature if you are not able to choose an appropriate place.
    Reyee REX12 Extender Setup

    Preparation

    • Check the power outlet whether it is working or not.
    • Connect the extender to the outlet and power it up.
    • Check the LED. It should be of solid teal color.
    • Collect your SSID and password from the label.
    • Further, connect your router and your extender with the help of an ethernet cable.

    Time To Configure The Extender

    You must have connected your router and the extender by now but if not, two other methods are given below:
    • Wireless Connection – you need to access your wifi settings for this method. Go to the internet settings. Then, tap on Search to find new devices. You will see Reyee’s extender name on the list of available devices. Click on it. Give it a little time to connect.
    • WPS Connection – WPS is a small touch button beside the power button on the Reyee extender. First, press the WPS button on your router for a few seconds. Then, do the same again with the extender’s WPS button. Let them connect. The WPS LED will stop blinking and get stable once the connection is formed.

    Get Ready To Log In

    • Open any web browser of your choice.
    • Type 192.168.110.1 in the search window.
    • Click on the login option.
    • Fill in your SSID and password.
    • Click on the Sign In button.

    More Of A Mobile Person? Here Is The Mobile Based Login

    • Download the app.
    • Select your extender model.
    • Click on the login interface.
    • Enter your login credentials.
    • Tap the Sign In button.
    • Login will be done instantly.

    Let’s Finalise The Setup

    • Start with customizing settings.
    • You need to enter your login credentials before changing them.
    • Manage parental control feature if you have kids at your home.
    • Also, set up port forwarding, guest mode, etc.
    • Click on Done after completing the customization.
    • Go to your wifi settings again.
    • Connect to your router device.
    • Reboot your device and enjoy the limitless data connection.

    What To Do If You Face Issues While Setup?

    Getting stuck while performing the Reyee REX12 extender setup is very common. So, instead of getting worried, contact our tech support team. All the members are highly trained to resolve most issues in no time. We work round-the-clock which means you can call us anytime. You can chat with us or mail us in case you are not comfortable with calls.