Rockspace AX1800 WiFi 6 Extender Setup

Live Chat

Struggling with a technical issue? Write to us right away. Our support team often responds quickly.

OR

Don’t want to wait? Call us right away.

Call Now

    Configure AX1800 WiFi-6 Rockspace Extender

    By purchasing the Rockspace WiFi-6 extender you can increase your WiFi network range quickly. There is an uncomplicated login and setup process for the AX1800 extender. By installing this device you can clear all the dead spots areas of your office or home.

    Required Things To Install Extender

    There are several things that are required to install the Rockspace extender:-
    • Required a working internet connection.
    • Take an electrical socket that works perfectly.
    • Also, have WiFi devices such as laptops or computers.
    • Grab a wire or some hardware parts required for setup.
    AX1800 WiFi-6 Rockspace Extender

    Enter Rockspace Web Page

    To enter the Rockspace web page, place the AX1800 extender power plug in an electrical socket. Further, press the AX1800 Rockspace extender power button to turn it on. After that, connect the computer to the Rockspace extender default network. Now, launch the web engine and type re.rockspace.local in the search bar. Fill in the default information such as SSID and password. In the end, click on the login button to finish the Rockspace AX1800 extender login process.

    Note:- If you don’t know the default login details then check the Rockspace AX1800 extender tag or bottom.

    Configure AX1800 By Pressing WPS

    Configure AX1800 By Pressing WPS

    The WPS method is an uncomplicated process to configure the extender.
    Early, locate the Rockspace AX1800 extender plug near the existing router. After that, press the router and extender WPS button. By doing this, they both connect automatically after blinking the solid WPS light. Further, remove the extender plug from the socket and locate the extender in that zone where you are facing slow internet speed.

    Note:- When doing this method make sure that your existing router must support the WPS button.

    Configure AX1800 Extender By AP Mode

    If you are unable to do the extender setup by the WPS method due to any reason then try this AP setup method process.

    Early, on a computer or laptop open a search engine and type re.rockspace.local in the address bar. Fill in the details shown on the display page. After that, go to the operating mode option and then hit the AP mode option. Further, attach the Rockspace AX1800 extender with an existing router LAN port. In the power outlet plug the Rockspace extender. At the end, attach the WiFi device with the Rockspace WiFi range extender network.

    After following the abort login and setup instructions if your Roockspace AX1800 extender does not work perfectly. Then don’t worry just try the below solutions tips to fix the extender error.

    Troubleshoot Tips To Fix An Error

    There are several ways to fix an error of an extender.

    Upgrade Rockspace AX1800 Extender Software:-

    To download the software, connect the WiFi device to the Rockspace extender default network. After that, go to the web management page. Further, click on the network administration option and then tap on software installation. In the end, if you find any latest software version files, install them on your computer.

    Change Extender Placement:-

    By placing the Rockspace AX1800 extender at the optimal location of your workplace or house. When placing the extender at the central location then make sure that not even a single metal or electronic appliance should be placed near that.

    Reboot AX1800 Rockspace Extender:-

    To reboot the Rockspace extender, look for the power button and press it to turn off the extender. After that, from an electrical socket take out the extender power plug. In the end, place the extender pluck back after waiting a few minutes and press the extender power button to turn it on.

    Identify All Hardware Connections:-

    To identify all the hardware parts check all the cable connections or that part that connects with an extender. If any cable or part is damaged and it is connected with an extender then I recommend you replace that damaged part with a new one.

    Do All Login & Setup Processes Again:-

    By resetting an extender do the Rockspace AX1800 WiFi 6 Extender Setup and login process again.

    For this look for the reset button on the extender. After that, take a paper or hairpin to press that button. By pressing the reset button with a pin, all the AX1800 extender LEDs will be turned off. All AX1800 extender power LEDs indicate that the extender is now completely reset.

    Further following all the information on this page you can do the Rockspace extender setup and login process. After doing login and setup if you face any error in the device then you can also easily fix that by trying the apart information. In case, you have any questions in your mind then talk or chat freely with our technician. They will help you and fix your issue.