Wavlink AC3000 Setup

Live Chat

Struggling with a technical issue? Write to us right away. Our support team often responds quickly.

OR

Don’t want to wait? Call us right away.

Call Now

    Wavlink AC3000 Extender Configuration

    Wavlink AC3000 extender device helps to extend the range of WiFi signals. The installation process of the Wavlink ACC3000 extender is not so much complicated. To get high internet speed early you will required to install this device.
    wavlink AC3000 Extender

    AC3000 Extender LEDs Specification

    WPS LED:-

    • Solid Green WPS LED:- The extender successfully connects with the host router.
    • Solid Red WPS LED:- This solid red LED indicates that the extender fail to connect with the router.

    Power LED:-

    • Solid Amber Power LED:- This LED indicates that the extender is successfully turned on.
    • Solid Red Power LED: A red solid power LED means that the extender is not turned on perfectly.

    Requirement For AC3000 Extender Installation

    Must have the Wavlink AC3000 WiFi range extender device closer to you.
    • A modem or router must be in working condition.
    • Know the default login credentials of the AC3000 extender which are printed at the label of an extender.
    • Grab a WiFi device such as a laptop or computer with an updated web browser.
    • Install the Wavlink application on your cell phone.
    • Also, have an ethernet cable to connect an extender with the router.

    Access AC3000 Login Page

    First, take an extender and place it in an electrical socket. After that press the power button to turn it on. Now, grab the laptop and connect it to the Wavlink AC3000 extender default network. Further, on a WiFi-connected device, launch the browser and type wifi.wavlink.com in the address bar. Fill in all the information such as username and password. Make sure that you will need to fill in the default information. In case you don’t know the default login information then check the extender label.

    By Pushing The WPS Button Configure Extender

    Early, closer to the router place the Wavlink AC3000 extender. After that, on both the unit’s extender and router find the WPS button. Later, press the WPS button. By pressing the WPS button extender automatically connects with the existing router. Further, take out the power plug from an electrical socket after connecting with a router and locate it where you are facing slow speed or where you want high speed.

    Important Tip:- Make sure when you’re doing the WPS method process then make sure that your existing router must support the WPS button.

    AC3000 Extender Configuration By Ethernet Cable

    First, take the ethernet cable and connect it to one end with a router ethernet port. After that, attach the remaining end of an ethernet cable with the extender ethernet port. Now, take one more ethernet cable and connect the computer to the extender. Further, open Chrome and type the default web portal of Wavlink i.e.; wifi.waavlink.com in the URL bar. After that, enter the details and tap on the start setup option. Later, make a new username and security password and save it. In the end, connect the computer with an extender network to enjoy the internet.

    After doing the installation process by the apart WPS and ethernet cable, if your extender does not work properly then just try the below solution tips to fix the error.

    Solution Tips To Fix An Extender Error

    Try To Upgrade Extender Software:-

    To upgrade the software of the Wavlink AC3000 WiFi range extender you will required to access the web management page. For this, take the computer and attach it to the Wavlink AC3000 extender default network. After that, launch Chrome and type wifi.wavlink.com in the address bar. Further, search for the network administration and then tap on the software installation option. In the end, install the latest software file on your computer. The installation process takes 15 minutes to complete.

    Place AC3000 Extender At Optimal Location:-

    By placing the extender at the central location of the office or house. Make sure that the extender not be placed closer to the metal or electronic appliances. Electronic types of appliances absorb all the WiFi signal that comes from the router and extender.

    Power cycle AC3000 Wavlink Extender:-

    Initially, press the AC3000 extender power button to turn it off. After that from an electrical socket take out the power plug. Next, wait and place the AC3000 power plug in the socket. In the end, press the power button of the AC3000 extender to turn it on.

    Identify All Hardware Parts:-

    We recommend you look up all the hardware parts that connect with an extender such as cable, power socket, etc. If any hardware part is damaged or corrupted then immediately change it with a new one.

    Perform Hard Reset:-

    Early, look for the reset button on your AC3000 Wavlink extender device. After that, take a pin or paper clip to push the reset button. Further, insert the pin in the reset button for 10 seconds or until all the extender LEDs are turned off. All turn-off LEDs indicated that the extender is completely reset now.

    Note:- After resetting the AC3000 Wavlink extender you will be required to do the login and installation process again.

    Stay closer to this page if you want more updates on the Wavlink AC3000 WiFi range extender. Have a great day.