Wavlink Halo Polar AC3000 Setup: In-depth information
Setting up the Wavlink Halo Polar AC3000 device will create your home a wifi hub. It is a mesh network system. In this networking you can set up a main device in router mode and add a few other devices in extender mode. All the devices form a single network with the same SSID & password. Don’t worry Wavlink Halo Polar AC3000 Setup is not at all a daunting task. You can do it by yourself with a little information without any tech expertise. With us you can easily configure the device and enjoy high speed internet. Walk through the further segments of this page and follow the step by step guide to configure the device. Also this page contains detailed information about the device and its installation. Furthermore you can also resolve any issue you might encounter with Wavlink Halo Polar device.
Wavlink Halo Polar Specifications
Wavlink Halo Polar is a mesh system with simultaneous 5GHz 867Mbps + 1733Mbps and 2.4GHz 400Mbps speed. In this system you can connect up to 10 additional devices to extend the signals. The device has four 7dBi 5G antennas with two 5dBi 5G antennas and two 5dBi 2.4G antennas to strengthen the network and enhance its coverage. Also you can connect multiple devices with the network at the same time without reduction in data speed. Furthermore you can set up a guest network for visitors to protect wifi network. In addition, you can perform Wavlink Halo Polar AC3000 Setup in your home very easily.
Wavlink Halo Polar Installation
To configure the halo polar device you need to install it first. Installation of the device involves a few easy steps.
- First of all unbox the mesh system device.
- Thereafter take one of them and connect it with your modem.
- To connect it, use an ethernet cable.
- Afterwards, connect it to power by using a power adapter.
- The LED turns into solid purple and the device installation completes.
Wavlink Halo Polar AC3000 Setup process
There are two methods to configure your halo polar. First one is web based and the other one is app based. Follow the steps of any one to configure your device.
Web Setup
To begin with the Wavlink Halo Polar AC3000 Setup, you need a client device. Also an updated version of any browser must be installed in the client device. If you have then follow the given steps:
- Firstly, connect your laptop/ computer device with the main router satellite.
- To establish this connection you can use wired or wireless method as per your choice.
- Once connection completes, use the web browser to search wifi.wavlink.com portal.
- Thereafter login by using admin as your default password.
- You’ll get access to the user interface, create your network security key first.
- Thereafter choose the region and time, click the next option and move ahead.
- Follow the on screen guide and configure your main device.
- Thereafter add the other devices and configure them in extender mode.
- Add the devices to the network, finish the setup and locate the satellites to the locations you want to extend coverage.
App Setup
You can easily set up the device by using the wavlink app. Wavlink app is available on app store or google play store to download. You can get it from there as per the device you have and then proceed with the Wavlink Halo Polar AC3000 setup. Setup involves simple steps as guided by the app screen.
Wavlink Halo Polar: Troubleshooting
Troubleshooting the issue with your wavlink halo polar device is simple. Check out the steps we have mentioned to configure the device:
Cable Connection Verification
First of all you need to check the cable connection of the device with the network of which you have an issue. In case all the cable connection is secure then you can move ahead otherwise replace the damaged cable to resolve the issue. Also if the issue persists even after then go to the next troubleshooting.
Check Modem’s Internet
Thereafter you have to check the modem device internet. Sometimes the issue is with your modem’s network and you can’t resolve it by yourself. Connect your ISP in such a case. On the contrary, if there is no issue then you need to check the next troubleshooting.
Restart Your Network Devices
Resetting the device might resolve the issue with the Wavlink Halo Polar AC3000 Setup. To reset the devices you have to turn off the power cycle of the extender satellite nodes. Thereafter you have to move ahead and turn off the power cycle of your main hola polar satellite. Once done, wait for about 2 minutes and then plug-in the devices again. First turn on the power cycle of your main satellite and then turn on the other satellites.