Get Stable Connection With WL NWP502M2 AV500 Powerline Setup
Looking to extend your home network to get a more stable connection? Try out WL NWP502M2 AV500 Powerline Setup, a device that extends the network through the electric circuit of your home. The transmission of data through the powerline device setup provides a more stable connection for streaming videos and playing online games. The process of installing the device is very easy, quick and straightforward. You can check out the setup steps and enhance your home networking with our guidance. In addition, we also offer a troubleshooting guide. In case you encounter trouble with your powerline device then you can connect our technical team for help.
Prerequisite of WL NWP502M2 Powerline
WL NWP502M2 AV500 Powerline is a device offered by wavlink. It is an extender device to enhance the reach of your home router network through cables. It’s working is very different from traditional extender devices. This device uses your home electrical wiring to extend the network. Before moving ahead with the WL NWP502M2 AV500 Powerline setup, you need to fulfill the basic prerequisite. All the things are listed further which are mandatory for the setup:
- A host WiFi networking device (router) with working internet.
- Wavlink powerline adapters
- Wall power outlets (first one closer to the router device)
- Ethernet cable
WL NWP502M2 AV500 Powerline Setup Process
Setup of the powerline adapter is very easy. You can complete it within 10 minutes or less. The process involves installation process with pair button based configuration. You don’t need to configure the device using the web or app to use it. Web based configuration is completely an optional process. You can extend your router’s network through your home electric circuit without any additional wiring. So, without any further discussion check the steps involved in WL NWP502M2 AV500 Powerline Setup.
Installation of AV500 Powerline
You can install the AV500 powerline adapter very easily check out the step by step guide to install the device:
- Firstly you have to unbox the device. Along with two powerline adapters you will find two ethernet cables in the box.
- You need to use the ethernet cable to connect the powerline adapter with the home router or with the other devices to use the internet.
- Plug-in one of the NWP502M2 AV500 Powerline adapters closer to the router device.
- Thereafter check the power LED of the device and connect it with the router.
- Use an ethernet cable to connect the adapter with the router. You need to insert one end of the ethernet cable in the LAN port of the router and another in the LAN port of the adapter.
- When the connection is established you’ll notice the LAN LED turn on.
- Thereafter you need to plug-in the other adapter with a power outlet. Keep the other adapter with-in the same electric circuit. Also check the LED of the device to confirm.
- If the Link LED of the adapter turns red in color then try another wall outlet.
Pair Button Setup
Moving ahead with the WL NWP502M2 AV500 Powerline Setup you need to use the Pair Button.
- Press and hold the pair button given on the front panel of the adapter for about 2 seconds.
- You can press the pair button on any of the devices first.
- Once done, then press the pair button on another powerline adapter within two minutes.
- As you press the other device pair button, the device connects successfully and securely.
- To verify the connection is completed check out the Link LED on both the devices. In case it turns red, it signifies trouble otherwise the process completes successfully.
- Test your network by connecting the ethernet cable to another adapter and a device in which you desire to use the internet.
Web Configuration
Web based WL NWP502M2 AV500 Powerline Setup facilitates change in domain name of the devices. To move ahead with this process you need a computer or laptop device to use the web.
- Firstly, notice the IP address of the powerline device by using which you can use the device settings.
- If you don’t have the device IP then set a static IP to get access to device settings.
- Thereafter open the computer and connect it to your home network.
- Launch a web browser you desire to move ahead with.
- Go to its address bar and then enter the IP address.
- Later on move ahead with the on screen guide and make changes in the domain name.
- Save the changes by clicking on save option and web configuration completes.