The Complete Guide On WL NWP502WM N300 Powerline Setup
Overview Of WL NWP502WM N300 Powerline Setup
It’s important to know about the features of this magical device so here you go:
- First, it complies with IEEE 802.11 a/b/g/n standards.
- Next it supports WPA-PSK / WPA2-PSK security encryption.
- Further, it provides you with the data transmission rate of up to 300Mbps.
- The successful WL NWP502WM N300 Powerline Setup effectively removes all the dead zones from your home or office.
Coming to the technical specifications it consists of one 10/100 Mbps LAN port. On the front panel you get one round pair button and four LED light indicators. Whereas the side panel consists of a reset button. The exact dimensions of the product are 76.8mm×51.9mm×68.4mm (L×W×H).
Now let’s unpack the box. Inside the box you get in total 5 components. You get two WL NWP502WM N300 Powerline Extenders, two Ethernet cables and one user guide. The user guide contains each and every information like technical specifications, features, setup process, login details and much more. Keep this manual by your side during the WL NWP502WM N300 Powerline Setup process. As it is needed for gathering certain information like default IP address, password and much more.
Use Pair Button For Quick Setup
- First, take out each component carefully out of the box.
- Next, plug in one of the N300 powerline extenders near your existing router.
- Use an Ethernet cable for the connection. So plug one end of it into the LAN port of the router and the other end into the N300 extender.
- Wait for the LAN LED to light up. Once it lights up, move to the next step.
- Further, take another N300 powerline and connect it to the other power socket. Ideally plug it in a room where you want to extend your network.
- Lastly, press the pair button first for at least 2 seconds on any one of the adapters. You will notice that the Link LED starts to flash. Within the next 1 to 2 minutes tap the pair button on the second powerline extender.
- Now the N300 powerline extenders will automatically connect to each other. Check the LED light status to know if the WL NWP502WM N300 Powerline Setup is successful or not.
- As the WL NWP502WM N300 Powerline Setup is all done. To connect your devices use ethernet cable. Simply plug one end into the adapter and the other end to your device.
Customize Your WL NWP502WM N300 Powerline Setup Through Internet Browser
Connect
Open Internet Browser
- Firstly, the browser should be updated to the latest version.
- Secondly, it shouldn’t be corrupted.
- Lastly, clear the caches and cookies if any.
Log In
Now, go to the address bar of your chosen internet browser. Use default IP address to log in. This information is clearly provided in the user guide. The default password is “admin”, just make sure to use the lower case. Now follow the on-screen guidance to change the domain name.
Note: In case you aren’t able to find out the default IP address then set your device to a static IP address.
Customize Your WL NWP502WM N300 Powerline Setup Through Internet Browser
Connect
Open Internet Browser
- Firstly, the browser should be updated to the latest version.
- Secondly, it shouldn’t be corrupted.
- Lastly, clear the caches and cookies if any.
Log In
Now, go to the address bar of your chosen internet browser. Use default IP address to log in. This information is clearly provided in the user guide. The default password is “admin”, just make sure to use the lower case. Now follow the on-screen guidance to change the domain name.
Note: In case you aren’t able to find out the default IP address then set your device to a static IP address.
How To Reset WL NWP502WM N300 Powerline Setup ?
If by any chance you are facing issues with the connectivity or due to any other reason you want to reset the powerline then these are the steps you need to follow:
Simply locate the reset button and press it down for at least 8 seconds or until the LED lights vanish off and then release it. The powerline is back to its default settings. Now you can easily redo your WL NWP502WM N300 Powerline Setup process all over again.