Wavlink Powerline: Quick Setup And Troubleshooting Guide
The WL NWP505D2 AV500 Powerline Setup works with your existing router to amplify the signals. It is ideal for both homes as well as offices. With its successful installation you will never face the issue of poor or low signals.
In this guide you get complete information about its features, setup process and guidance for troubleshooting some common issues.
Easy Setup With The Pair Button
The first and the best feature of WL NWP505D2 AV500 Powerline Setup is that it comes with the Pair Button. This feature allows you to complete the setup with a few simple steps.
- Firstly, plug one of the AV500 powerline adapters into a properly working power outlet. Switch it on. To make the kit searchable make sure you plug them near to the host router.
- Next, connect the powerline extender to the router. Use ethernet cable for the same.
- Further, connect another AV500 powerline to another power outlet and switch it on. You get two Ethernet cables with the purchased pack so there is no need to buy them separately.
- Lastly, now you just have to press the Pair Button for completing the WL NWP505D2 AV500 Powerline Setup. First push the button on any one of the adapters for about two seconds and then within the next two minutes press on the other powerline.
- Use the Ethernet cable to connect your devices to the extended network.
Use Internet Browser For Configuration
Once the WL NWP505D2 AV500 Powerline Setup is all done you can change the domain name through the internet browser. For this, first connect your smartphone or your laptop to the network. Further, open an internet browser. You can use Google Chrome, Firefox, Safari or any other well updated web browser. In the address bar type the default IP address that is allocated specifically to your model. All these details are precisely mentioned in the provided user guide. As you enter the correct IP address then use the default password which is “admin”. Lastly, configure the settings as per your needs. Do not forget to save and apply all the changes.
Key Specifications
Apart from the easy setup process it comes packed with certain other great features. So let us list them all one by one:
- Firstly, it offers a high speed data transmission rate of up to 500Mbps.
- Next with its power saving mode you can reduce the electricity consumption. Thus it is an economical product as well.
- The smart LED light indicators help you in understanding the working of the extenders. It consists of a total of four LED indicators.
- Further, it can easily penetrate its signals through thick walls. Therefore you need not worry about the dead zones.
- Lastly, its flexible wall plug design doesn’t take any extra space in your home and blends seamlessly into your home aesthetics.
Providing Solutions To Common Challenges
If you are facing some issues with the WL NWP505D2 AV500 Powerline Setup then consider following points:
Check Wired Connection
Firstly, check all the wired connections. Check the wire connecting your router and the powerline as well as the device. No connection should be loose or the wire shouldn’t have any cuts or bruises on it.
Ensure Proper Power Supply
Further, if the wires are connected properly then check the power supply. It’s advisable to use the power socket that has connection with the inverter. So in case the light dozes off, your extenders still work properly.
Check Router
Next, make sure your router has active internet plans and is also powered on and working best to its abilities.
Placement Is Crucial
Additionally, the placement plays a very major role in the overall working of the WL NWP505D2 AV500 Powerline Setup. So do not place both the powerline extenders too far to each other and to the router as well. As then they won’t be able to receive signals from each other.
Reboot The Powerline
If everything is proper but still you are facing issues then consider rebooting the device. Simply unplug or disconnect everything and wait for sometime. After that plug each device back to its source and power them on.
Resetting: The Last Option
If nothing works all you can do is try resetting the power lines to its factory default settings. Use the provided reset button for the same and then reconfigure them using the above mentioned WL NWP505D2 AV500 Powerline Setup process. For this push the reset button for at least 8 seconds, all the LED lights turn off thus indicating a successful reset.
Connect For Support!
If by any chance you still come across any issues with the setup or have any query then do not hesitate to connect for support. Our highly experienced and professional team members are always ready to assist you 24/7.