WL WN529B3 AC1200 Router Setup: Up Lift Your Network Signals
Wish to uplift your home network? Looking for a device that resolves all your network issues then check out WL WN529B3 AC1200 Router by wavlink. A device that offers high speed internet via dual band frequencies. You can get 1167Mbps of total available bandwidth through both 5G & 2.4G connections simultaneously. Guest WiFi feature of the device enhance your network protection. With the WL WN529B3 AC1200 Router setup, you can cover signals across your home or office. Setup of the device is far simpler than you imagine through the WPS button. Also you can control or manage the device network with your smartphone. In addition to this web based configuration provides you access to the extra security features and guest WiFi setup. So, what are you waiting for, do the setup now! Setup instructions are specified underneath.
WL WN529B3 Router Initial Setup
You can initiate the WL WN529B3 AC1200 Router Setup with the initial process. During this process you need to install the hardware and turn on the device to configure it. The process involves few steps as described underneath:
Unbox
- First of all unbox your router device and check what you get in the box.
- You might find the router device along with a power adapter, an ethernet cable and user guide.
Locate
- Take the device out and search for an ideal location.
- The location required to keep the device must be closer to the host networking device (modem or upstream router).
- In addition, there should be no radio frequency device or heavy metal object closer to the router placement.
- In case there is any such object, it interrupts signals & degrades the device performance.
Power
- Once placement is decided you need to connect it to the power outlet to turn on the device.
- Use the power adapter you get with the router device.
- Connect it to the power port of the router and then plug-in into the power outlet.
WL WN529B3 AC1200 Router Setup Procedure
Setup of the device is way simple, it’s not at all formidable as you think. You don’t need technical expertise for the setup. Just opt a way from the three methods and proceed with the configuration. Instructions to follow in each method of the WL WN529B3 AC1200 Router Setup is mentioned further:
WPS Setup
Initiate with this setup method only if you have a host networking device with WPS enabled feature. Also verify your host device network before initiating. Steps involved in the process are here:
- Press the WPS of your router device first following which you have to press the button on your host networking device.
- Release the button of the router device after 3 seconds.
- Also complete the whole configuration process in about 2 minutes.
- Once the process completes successfully, you’ll see the WiFi LED of the router lit up solid green.
- In case the process fails, try it again with the same or any other method.
Web Setup
Web based configuration might need a host networking device with working internet, an ethernet cable along with a computer/ laptop to access the web page. Once you have all, proceed with the setup instructions below;
- Initiate with connecting the computer/ laptop device with the router’s network.
- You can use wired method or wireless method as per the convenience.
- Later, start the web browser and search for wifi.wavlink.com or default IP 168.192.10.1.
- Once the login page appears, enter the required details in it to access the page.
- Afterwards follow the on screen instructions and complete the WL WN529B3 AC1200 Router Setup.
- While proceeding with the setup process, provide the home network information and click on connect option.
- Also make changes in the device security key, guest WiFi settings and other necessary settings.
- At last click on the apply option and then check the new network.
App Setup
For app based setup method, you require a smartphone device, wavrouter app and host network device with stable network connection. You can get the application from the google play store or app store. Download it and then move ahead with the underneath given steps:
- Connect your smartphone with the router’s network firstly by accessing the WiFi settings of your phone.
- Thereafter, move to the next step and launch the app.
- In the app you need to get access to the dashboard.
- To get it follow the app screen guide and then go to the device.
- Choose the add option and select your router’s model name as “WN529B3”.
- Then follow the screen and click on start setup.
- Afterwards, enter the SSID & password of your home network device.
- Let the devices establish connection by hit on connect option.
- Make changes in the password, create a guest network for visitors and also check for firmware updates.
- Lastly, hit on apply option and test the router’s network.