A Complete Detailed Guide On WL WN560N2 N300 Extender Setup
We understand well that poor connectivity in certain corners and slow internet speeds can lead to anger and frustration. So what is the solution? The solution is to invest in a good quality wifi range extender. As it will not just extend the range of your existing network but will also provide good speed and lag free internet experience. So in today’s guide we will be exploring the WL WN560N2 N300 Extender Setup. We will be covering the features of this Wavlink range extender. Further you will get a complete and detailed guide on its setup process and lastly some troubleshooting tips and tricks. So without further ado let’s begin.
Feature Set
The WL WN560N2 N300 wifi range extender comes packed with so many great features like:
- Firstly it effectively expands the coverage of your existing network. With its successful installation you can enjoy the internet activities from any corner of your home.
- Secondly, its compact and classy wall plug design is extremely convenient. So you can plug it anywhere in your home as per your specific requirements.
- Next, it can easily handle multiple devices simultaneously. So no matter how many devices you own, each device will get equal speed and connectivity.
- Furthermore, the extender comes with one Ethernet port. This means you can easily connect your wired devices directly to the extender. For eg: Your smart TV, gaming consoles, DVR’s and much more.
- Additionally, it comes with high security protocols like WPA/WPA2. So, you can rest assured that your network is safe from unauthorized access.
- Lastly, the WL WN560N2 N300 extender can also be used in access point mode. So basically it offers flexibility. You can easily choose between the access point mode and repeater mode.
Installation Process
The WL WN560N2 N300 Extender Setup process is extremely easy and straightforward. Anybody can perform it independently without any expert help. So we will be providing two methods so you can choose the one as per your wish.
WPS Method
The primary requirement for this method is that your router should have a WPS button on it. But in case your existing router doesn’t support the WPS method then you do not need to worry as the second method will be your savior. So to setup the extender via WPS method you just need to follow these steps:
- Firstly, place theWL WN560N2 N300 extender near the router.
- Secondly plug it in the wall socket and power it on. Wait for the power LED on the extender to stabilize.
- Next, press the WPS button first on the extender and then on the router.
- Now, give the devices sometime to sync together. It may take a few minutes. Check the LED light status to know whether the connection is successful or not.
- Once the connection is built, just unplug the extender and move it to a location where you need the extended coverage.
- Also, make sure the extender is placed within the range of the router.
- Finally, connect your devices to the new network by using the default username and password.
Note: Keep the user manual handy as it contains all the minute details like default username and password. Also you can check what each LED color indicates through the user manual only.
Web Based Setup
Here are the steps for the second setup method.
- Place the extender near the router, switch it on and let it stabilize.
- Secondly, pick up any of your devices. Go to its wifi settings and connect to the extender’s default network name.
- Next, on the same connected device open a web browser. Go to its address bar and type in the default IP address and press Enter. The default IP address is usually 192.168.10.1. Always consider the user manual for accurate details.
- As you press enter, a login page will pop up on your screen. Use the default login details to enter the page.
- Next, you just need to follow all the on-screen prompts to complete the setup process.
- Finally, relocate the extender to a new location which is halfway from the router and the area where you need the extended coverage.
- Lastly, test the connection by connecting your devices to the newly created network.
Troubleshooting Guidance
Incase you are facing some connectivity issues then consider these points:
- Proper placement of the extender is extremely important. So make sure there are no physical obstacles like thick walls, electrical appliances or metal objects near or between the extender and the router.
- Secondly, before proceeding with the web based setup do clear the browser’s caches and cookies.
- Restart the devices to solve minor connectivity issues. To restart, simply unplug everything and wait for about 30 seconds and then plug it back.
- Next, recheck the login details. Check whether you are using the right letter case or not as these things are case sensitive.
- Lastly, if nothing works then consider resetting the extender to its factory default settings.
Connect To Us For Support!
We offer 24/7 support to our customers. So in case you need any help or have any queries or issues then feel free to contact us for support. All the contact details are mentioned downwards.