WiFi range extender devices are used to enhance the coverage of the existing network. These devices will take signals from your existing networking device and then rebroadcast them to the area where the network is not reachable by the existing networking device. With the help of wonlink WiFi extender you can easily eliminate WiFi dead zone problems. The setup of this device will strengthen your network and offer strong signals. Wonlink WiFi extender setup process is very simple and includes a few steps. Anyone can add the device into their network by following the setup process. In the blog further mention the detailed setup process which you can follow to configure the device. 

Wonlink WiFi Extender Installation

Prior to performing Wonlink WiFi extender setup, install the range extender device. Installation includes following steps:

• Unbox wonlink extender and remove the packaging. 
• Verify that the extender is not damaged and the unbox contains user manual, ethernet cable & power adapter also. 
• Thereafter find a place to put your wonlink device. 
• Connected with power using an adapter. 
• Wait for the boot up after powering the device. 
• Once the device LED gets stable, connected with a computer or laptop. 
• Ethernet cable or wireless network can be used for connection.

Wonlink WiFi Extender Setup Using WPS

Embark on the wonlink WiFi extender setup using the WPS button. The WPS push button process is very simple. You simply need to push the button on both the extender and router device with which you desire to connect it. This process is simple to follow and quick to connect the extender with the router. Prior to starting this setup method make sure your router supports WPS based connection. 

Wonlink WiFi Extender Setup Using Web

Embark on the wonlink WiFi extender setup using the web is a little time consuming method but offers you several customisations. By following this method you can easily add the device to your network. This method involves several steps. Step by step guide is mentioned below but if you got stuck somewhere then you can connect our wonlink customer support team for help. Our service team experts will guide you with the steps ahead from where you got stuck. Let’s start the setup steps:

Launch A Web Browser 

Launching a web browser is the first step of the setup process. You can use any web browser in which you can access the setup page. Browser you are using must be the updated one. Either use Google Chrome Mozilla Firefox Safari Internet explorer or any other similar browser.

Access The Setup Page 

Access the setup page by entering the default IP 192.168.10.1 in the address bar of the browser. This will open the web interface of the wonlink extender device. Get the access by entering the default username and pass key.

Configure The Extender 

Configure the extender by connecting it to the existing router device. For connection you should search for the network name in the appeared list. As the name appears, choose it and enter the pass key. 

Secure Your Network 

Secure the network by replacing the admin account username and pass key. Also secure the extender’s network by choosing a name and pass key for the extender’s network.

Update The Firmware 

Don’t forget to update the firmware if the device is using the outdated version. Firmware updates will help you to use advanced features and optimize the device performance.

Finalize Setup 

Don’t forget to review changes and note down the pass keys. After that, click on the submit tab to finish the process. 

Test Network 

Once the wonlink WiFi extender setup is done, take a smartphone and connect with the extenders network. Now browse high definition content, play online videos, open websites to check the network speed. Move around the space and browse the network to check the coverage. In case you find weak signals anywhere then go for relocating the extender.

Relocate Extender

Relocating the extender is important to boost the network coverage. You have to look for a place from where your device can easily get the signals from the router. Also you have to make sure that there is no networking interference device placed closer. We advise you to avoid placement in the corners as it might interrupt signals. 

Conclusion

Wonlink WiFi extender setup will boost your network coverage and offer you a seamless network on which you can rely completely. Setting up the device is not a hard to follow process. By following the above given guide anyone can add the device into the network using the WPS process or web based process. Web based setup process is a little technical way to add the device. This process allows you to customize the network as per your need. In case you got stuck somewhere while performing the web based setup then you can connect wonlink customer support team on below specified number.