Linksys WiFi Range Extender- Login & Setup Process
Benefits To Install Linksys Extender
- Linksys extender eliminates all the dead spot areas.
- Helps to extend the WiFi network range.
- Install this gadget at any place in your office or workplace.
- Purchase Linksys extender at an affordable price.
Supported Products
Access Linksys Extender Web Management Page:-
To access the web management page of Linksys extender, you will require one WiFi device either a cell phone or a computer.
First of all, place the Linksys extender unit power plug in a specific power socket. Now, punch the power button to turn on the device. After that, connect the computer or cellphone with the Linksys extender default WiFi network. Next, open Chrome on a connected device. Later, enter the extender.linksys.com in the URL bar. Thereafter, fill in the admin details such as username and password. In the end, click on the enter button to access the Linksys WiFi range extender web management page.
Setup Process Of Linksys Extender
Configure By Pressing the WPS Button:-
First, place the extender device in the power plug and closer to the router. Now, hit both the unit’s extender and router WPS buttons. By doing this, wait for a minute to see a solid WPS LED on both gadgets. As it means, the extender and router units successfully connect.
If your existing router doesn’t support the WPS button, then you can’t do the Linksys extender setup by this method.
Configure Extender By Extender Mode:-
- Early, repeat the process and place the extender power plug in the socket.
- After that, connect the extender to a cell phone by default.
- Now, type extender.linksys.com in the URL bar on a WiFi-connected device.
- Next, hit on the start setup option, by accepting all the terms and conditions.
- Thereafter, make a WiFi password and create a username.
- Further, choose the WiFi range extender option and hit on next.
- When prompted, pick the existing WiFi network name and security password.
- In the end, save all the information.
Do Linksys Extender Installation By An Ethernet Cable:-
- In the beginning, place the Linksys extender power plug in the socket.
- Now, from the router to the extender attach an ethernet cable.
- Next, to the Linksys extender default, SSID connects your cell phone or computer.
- On the connected WiF unit, type extender.linksys.com in the address bar of Chrome.
- Hit on the start setup and pick the wired range extender or access point mode option.
- Thereafter, make a WiFi network name and password, and hit on next.
- Make the admin password for the Linksys WiFi range extender and save it.
- Also, fill in the details of your Linksys extender product to receive updates or other information to improve performance.
- By following the apart steps the Linksys extender setup is done now by the access point mode.
Solution Tips To Fix Extender Error
Upgrade Linksys Extender Firmware:- To upgrade the Linksys extender software you will need to visit the Linksys web management page. To access that page your computer connects with the Linksys extender default network. After visiting the web management page, look up the software upgrade option. In the end, install the latest software file if anyone is there.
Place Linksys Extender At Best Location:- The placement of an extender is also a major factor due to which the extender does not work properly. To fix this, we suggest you place an extender near the router and at the halfway location of your office or house. Make sure that the extender and router don’t be placed near metal or electronic appliances.
Power Cycle Linksys Extender:- Early, push the Linksys extender power button to turn it off and take out the power plug from the electrical socket. Now, wait for a minute and place back the Linksys extender unit power plug in the power socket. In the end, push the power button again to turn it on.
Reset All Default Settings:- To do this method process, early take a pin. After that, find the reset button on the extender. Now, insert the pin in the reset button. By pressing the reset button all the LEDs of an extender will be turned off. It means your extender is now fully reset.
Note: After doing the reset method process you will need to do the Linksys extender login and installation process again.
Further, following the entire directions of this page, you will be able to know all the basic information about the Linksys extender device. If you want more updates regarding this then stay closer to this page.